液壓貨梯為什么會機身發熱？

炎熱的夏天就要到來了，液壓貨梯http://m.olymzig.com/有很多都是在室外進行高空作業的，在室外高溫的環境下作業，很容易造成機身的溫度過高，下面南寧榮凱升降機械的專家給大家總結一下機身發熱的原因有哪些？

1、液壓貨梯在超載作業的時候會給電機造成非常大的負擔，這樣作業時間久了，機身很容易會變熱，解決辦法就是把液壓貨梯的載重量控制在額定重量之內。
Hydraulic cargo lift in overload operation will cause great burden to the motor, so operation for a long time, the fuselage is very easy to become hot, solution is to put hydraulic cargo lift the load control within the rated weight.

2、液壓貨梯機身摩擦力過大也是會產生機身溫度過高，解決的方法就是清理液壓貨梯縫隙中的雜物，再注入潤滑油。
Hydraulic cargo ladder body friction is too large, the body temperature is too high, the solution is to clean up the debris in the gap in the hydraulic cargo ladder, and then injected into the lubricating oil.

3、液壓貨梯油缸、電機有損壞，這種情況是最糟糕的情況，因?yàn)樽鳛橐簤贺浱莸暮诵?，如果出現溫度過高，油缸、電機是必須檢查的。
Hydraulic cargo ladder cylinder, motor damage, this situation is the worst case, because as the core of the hydraulic cargo ladder, if the temperature is too high, the cylinder, the motor must be checked.

4、液壓貨梯http://m.olymzig.com/連續工作時間過長，在烈日下頻繁的工作，要是沒有及時的做好散熱工作和工作時間，如果不及時做好散熱的工作的話，很容易燒壞電機。
Hydraulic cargo lift continuous long working hours, frequently in the hot sun, if there is no timely do a good job of cooling work and working hours, if not timely cooling, it is easy to burn out the motor.