升降舞臺油管爆裂的原因分析

在工作中有時候會遇到升降舞臺http://m.olymzig.com/油管爆裂的問題，這是一個非常嚴重的問題，不僅會影響到設備的安全性，更會阻礙工作的進行。下面南寧榮凱機械制造的有關專家就給大家介紹一下升降舞臺油管爆裂的原因。

1、要先弄清楚升降舞臺油管爆裂是由什么原因造成的，檢查下來基本上都是由于油管承受的壓力過大，或者相關的接口沒有擰死引起的。知道原因后要解決就容易多了，由于升降舞臺在設計的時候就安裝了相關的控制閥，所以如果發現油管有爆裂的現象，只要關閉控制閥并更換新的油管。一定要確保設備的安全性和穩定性之后，才能繼續使用，以免造成更大的損失。
First landing stage pipeline burst clear is what causes, check down basically because of the tubing pressure is too large, or the associated interface is not screwed caused death. Know why after much easier to solve, because the landing stage at design time on the installation of the associated control valve, so if you have a burst pipe discovered phenomenon, just close the control valve and replace with new tubing. We must ensure the security and stability of the equipment before they could continue to use, in order to avoid greater losses.

2、從側面我們也可以看出，升降舞臺http://m.olymzig.com/油管爆裂也提醒我們?cè)谠O(shè)計或生產產品的時候，要嚴格計算承載重力多需要的動力單元的大小，防止過大的動力單元工作時候?qū)υO(shè)備造成威脅，引起故障的發生。
We can also see from the side, landing stage pipeline burst also reminds us that in the design or manufacture of product, must be strictly calculate the size of the force of gravity carries much needed element to prevent excessive power unit when the work on the equipment pose a threat, causing failure.